Table of Contents
Advertisement
Date & Time
The Date & Time selection on the Device Settings page (see
opens a read-only pane showing date and time settings (see figure 50). Click Set Manually
(
) and Sync With Server (
1
The date and time can be edited by clicking the Edit button (
(see "Set time manually" and figure 51 and
NOTE: Editing of these settings is disabled and the Edit button is unavailable for
selection when the decoder is assigned to a NAVigator.
1 1 1 1 1 1 1 1
1 1 1 1
1 1 1 1 1 1
3 3 3 3
3 3 3 3
3 3 3 3
3 3 3 3 3 3
Set Time Manually
Figure 50.
Date & Time Selection
Set time manually
1 1 1 1 1 1
1 1 1 1
1 1 1 1 1 1 1 1
2 2 2 2
2 2 2 2
2 2 2 2 2 2
3 3 3 3
3 3 3 3
3 3 3 3 3 3
4 4 4 4
4 4
4 4 4 4
4 4 4 4
Figure 51.
Set Time Manually
Set from PC — Click this link to sync the decoder date and time to the computer with
1
which you are connected.
Date & Time — Click in this field and type in the date and time.
2
Time Zone — Click the drop-down list to select the offset from Greenwich Mean Time
3
(GMT).
NAV SD 501 and NAV SD 101 Scaling Decoders • HTML Operation
) to switch between the views applicable to each selection.
2
Sync time with server
3 3 3 3
3 3 3 3 3 3 3 3
3 3 3 3 3 3
figure 47
on page 48)
). An editable pane opens
3
figure 53
and
on page 51).
2 2 2 2
2 2 2 2 2 2 2 2
2 2 2 2 2 2
Sync
50
Advertisement
Table of Contents
