Extron electronics NAV SD 501 User Manual page 4

Streaming hdmi scaling decoders
Hide thumbs Also See for NAV SD 501:
Table of Contents

Advertisement

FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules. The Class A limits provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause interference. This interference must be corrected at the expense of the user.
NOTE: For more information on safety guidelines, regulatory compliances, EMI/EMF
Battery
CAUTION: Risk of explosion — Do not replace the battery with an incorrect type.
ATTENTION : Risque d'explosion — Ne pas remplacer la pile par le mauvais type de
ATTENTION:
compatibility, accessibility, and related topics, see the
Compliance Guide
on the Extron website.
Dispose of used batteries according to the instructions.
pile. Débarrassez-vous des piles usagées selon le mode d'emploi.
If not provided with a power supply, this product is intended to be supplied by a UL
Listed power source marked "Class 2" or "LPS" and rated output 12Vdc, minimum
2.0 A or 56Vdc (PoE), minimum 0.8 A.
Si le produit n'est pas fourni avec une source d'alimentation, il doit être alimenté
par une source d'alimentation certifiée UL de classe 2 ou LPS, avec une tension
nominale 12 Vcc, 2.0 A minimum ou 56Vdc (PoE), minimum 0.8 A.
NAV SD 501 and NAV SD 101 Scaling Decoders • Introduction
Extron Safety and Regulatory
iv

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nav sd 101

Table of Contents