Ports
The Ports selection on the Device Settings page (see
a read-only pane that shows the port usage parameters of the decoder (see figure 60).
The HTTPS and RTP Start parameters can be edited by clicking the Edit button (
editable version of the selection opens (see figure 61).
1 1 1 1
1 1 1 1
1 1 1 1
1 1 1 1 1 1
Figure 60.
Ports Selection
1 1 1 1 1 1 1 1
1 1 1 1
1 1 1 1 1 1
1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1
2 2 2 2
2 2 2 2 2 2
2 2 2 2
2 2 2 2
Figure 61.
Editable Ports Selection
HTTPS and RTP Start — Click in these fields and type in a valid values for your
1
decoder.
NOTES:
•
Valid HTTPS values:
•
= Disabled
0
•
= Default
443
•
1024
-
65535
•
Valid RTP Start values:
•
= Disabled
0
•
-
1024
65529
•
See the NAV Series Pro AV Ports and Licenses Guide, available at
https://www.extron.com, for more information on ports.
Save and Cancel buttons — Click Save to take Port changes or Cancel to abandon
2
them. Clicking either button closes the editable selection.
NAV SD 501 and NAV SD 101 Scaling Decoders • HTML Operation
= Usable range
= Usable range
figure 47
on page 48) opens
1
). An
56