Table of Contents
Advertisement
SIS Operation
The decoder can be remotely controlled directly or via an Extron NAVigator System
Manager. The decoder can be controlled, monitored, or configured using the following:
•
•
•
This section provides guidance on operation of the decoder via a string of commands and
lists the SIS commands, including:
•
•
•
•
•
•
Secure Platform Device
SIS commands cannot be issued directly to the decoder, but are issued via a NAVigator
on the system network using encapsulation (see the NAVigator User Guide, available at
https://www.extron.com
As a Secure Platform Device (SPD), the NAVigator communicates with Extron Pro Series
Control Processors over a secure, encrypted channel. The NAVigator is the host device for
Secure Platform Interfaces for native device controls and Pro Series Control Ports to control
external devices.
Communication using Global Configurator Plus or Global Configurator Professional, via a
SPD interface. See the applicable Help file to configure the program to issue SIS commands
to the NAVigator.
A user-defined string consisting of SIS commands (see below).
NOTE: SIS commands cannot be issued directly to the decoder, but are issued
via an Extron control system on the AV network using a process known as
"encapsulation".
Extron Toolbelt or a control system constructed using either Global Configurator Plus,
Global Configurator Pro, or Global Scripter (see
Built-in HTML pages (see
HTML Operation
Secure Platform Device
Host-to-Decoder Instructions
Decoder-Initiated Messages
Decoder Error Responses
Using the Command and Response Tables
SIS Command and Response Tables
for details).
NAV SD 501 and NAV SD 101 Scaling Decoders • SIS Operation
Control System
on page 59).
on page 17).
63
Advertisement
Table of Contents
