Table of Contents
Advertisement
Important information
1
Important information
1.1
Attention!
The following warning signs appear in the installation instructions and are intended to draw your attention to
circumstances that can potentially cause problems, near misses, personal injury and/or damage to the product,
etc.
m
WARNING!
WARNING indicates a potential hazard, which if ignored may lead to serious, life-threatening injury.
m
CAUTION!
CAUTION indicates a potential hazard, which if ignored, may lead to minor injuries.
!
IMPORTANT
IMPORTANT indicates a risk of equipment damage.
NOTE!
NOTE! refers to additional information that may help the reader understand, or perform, a given operation.
1.2
Configuration
This tail lift is available in a many different configurations. It is available in two versions, Standard and Slimline.
Lift height, lift capacity, slider profile length and platform size may vary. However, the installation principles are
the same whatever the configuration.
•
Standard or Slimline
•
Lifting capacity: 1500, 2000 or 2500 Kg.
•
Max lift height: -135 (1356 mm), -155 (1542 mm), -175 (1727 mm).
•
Slide profiles: 1590, 1700 and 1850 mm.
•
Platform: 1565 x 2400, 1765 x 2400, or 1965 x 2400 mm.
1.3
Technical support
If technical support is needed, please contact ZEPRO. Tel: +46 (0)10-459 05 04, E-mail: zeprotech@hiab.com.
Always be ready to state the tail lift's production number to guarantee you receive the correct information. The
production number is given on the identification plate located on the tail lift frame.
www.zepro.com
Picture 1. Identification plate
ZS MK2
5
Advertisement
Table of Contents
