If the COM Port number is labelled "in use", it is either currently used by a COM Port present on the
•
system, or is reserved for a device which is not currently present. It is possible to select this COM
number and force the change, if you are sure it is not required by any other device.
2.7. Port Settings
The Port Settings allow you to set Default or Override Settings for the serial communication and how to deal
with incoming hardware handshaking events.
To open 'Port Settings', open device manager and double click on the Brainboxes COM Port Entry
•
under the 'Ports' section
Then Click on the 'Port Settings' tab.
•
PX Range Product Manual
Version 2.3 © Copyright Brainboxes Limited 2013
Page 21 of 45