Table of Contents
Advertisement
PCI 3 Port RS232
STEP 5: The connectors
aperture to the outside world.
STEP
: Now replace the system unit's cover by carefully sliding it
6
down and back over the system unit. Replace the cover mounting
screws.
STEP
: After attaching all the monitor and keyboard cables,
7
power up the PC. Do not forget the mains power cable! The PC
should
power on in the normal way.
then
Problems!
If the system fails to power up normally check the following:
i.)
Ensure that the PC Serial card is installed correctly.
ii.)
Ensure that other cards in the PC have not been upset.
iii.)
Ensure that the power is connected and the PC is switched ON!
If all these have been checked and the PC still does not power up
then inspect the area surrounding the card to ensure that any
potentially harmful bits of metal etc. are not present. If the
problem persists ask your dealer to check the card or contact the
HELP line as given on Intro. page 2.
hould fit neatly through the slot's
s
Specifications
Chapter 2 Page 13
Advertisement
Table of Contents
