Table of Contents
Advertisement
PCI Velocity RS232422/485
Configuring Ports.
To view the settings of a port, select it and click on settings, and
then click on the resources tab:
Settings available in this window are:
Settings available in this window are:
1. Baud Rate - determines the baud rate at which the selected
port operates, the maximum value available is 921,600 (1
Megabaud.) Note: Many serial comms applications will not
actually register the ports as running at baud rates of above
115200.
2. Data Bits.
3. Parity.
4. Stop Bits.
5. Flow Control.
6. Advanced - see the section below, titled "Advanced Port
Settings."
Change to suit remote device.
Chapter 3 Page 59
Software Setup
Advertisement
Table of Contents
