PCI Velocity RS232422/485
Software Setup
Hardware Handshaking.
/H,4
Type 4, 3 Wire Handshake selected for all ports. Type 4, 3 Wire
Handshake selected for all ports.
Modifying Command Line Parameters.
When "assembled" the NEWCOM.SYS command line looks
like...
DEVICE=NEWCOM.SYS /A5-6,0140 /I 11,5-6 /B6 /S 512 /H,4
...and should be entered into the CONFIG.SYS file. Once you are
sure that these parameters have been entered correctly, restart your
PC and your PCI RS232/422/485 card should be ready to use
immediately. Sample terminal applications are provided on "Serial
Solutions CDROM" enabling communications to be established to
your peripherals quickly and easily.
Chapter 3 Page 22