Table of Contents
Advertisement
PCI Velocity RS232422/485
Note: A port that has been added has the default values of:
Baud Rate:
Data Bits:
Parity:
top Bits:
Flow:
Change the communications Settings in the COM Ports to match
the baud rate, parity settings etc. of the remote serial device.
Deleting Ports in Windows.
The Delete button can be used to discard the entries of ports that
have been removed from the system.
Note. Never try to leave out a serial port number when using the
delete button, because Windows may automatically shift serial port
numbers which results in a mis-match of settings in the Serial
Ports Applet (COM1-COM4 only).
Restarting Windows.
Whenever certain values have been entered or changed in the
hardware settings window, a message prompting to restart
Windows will appear. Only after having made ALL the necessary
changes restart Windows so that the new settings come into effect.
9600
8
None
1.0
None
Chapter 3 Page 28
Software Setup
Advertisement
Table of Contents
