PCI Velocity RS232422/485
PCI RS422/485 Port Settings In Windows 95.
Double clicking on a Velocity RS485 Port entry from the entry
"Ports (Com & LPT)" branch in Device Manager will the
display general properties window for the selected port (in this
case COM5).
Selecting the Port Settings tab produces:
Settings available in this window are:
1. Baud Rate - determines the baud rate at which the selected port
operates, the maximum value available is dependant upon the
Maximum Baud Rate Setting (see below.)
2. Data Bits.
3. Parity.
4. Stop Bits.
5. Flow Control.
6. Maximum Baud Rate Setting - four values are available,
which selects the maximum baud rate at which the port may
operate. The table below, indicates the ranges of baud rate values
available at the Maximum Baud Rate Settings.
Change to suit remote device.
Chapter 3 Page 53
Software Setup