Table of Contents
Advertisement
PSI BOX Reference
Setting It All Up.
______________ _
The PSI BOX comes complete with a mains cable and a
fused 13 Amp plug.
Connect the mains cable to the inlet on the back of the PSI
BOX. Plug the 13 Amp plug end into a suitable mains outlet.
Using the switch on the back of the PSI BOX switch the
PSI BOX on. LED 7 on the front of the PSI BOX is the power
LED. It lights up RED when the PSI is switched on. If the PSI
BOX does not power up check the cable connections and the
mains switches. If you still have trouble please contact your
dealer.
○○○○○○
Once you have got the PSI BOX switched on then you
must configure each port ready for use. Consult the sections that
follow, for specific details on each port, and the MODE
SETTING instructions. The details given should be sufficient to
resolve any ambiguities.
_______________________ _
Configuring The PSI BOX.
Don't be confused by the flexibility of the PSI BOX, it is
really quite easy to make it perform the way you want.
To configure the PSI BOX follow these steps:-
Page 6
________________________ _
Figure 1-4 The Power LED.
Talk
Listen
Xmit
Recvr
Centr O/P
Centr I/P
Power On
Setting Up The PSI BOX
Chapter 1
Advertisement
Table of Contents
