PCI Velocity RS232422/485
Windows 95 Installation.
To obtain a trouble free mix-and-match of the COM ports:
Switch off your computer, insert your PCI RS422/485 card
into a free PCI slot, as described in the section "Hardware
Installation" in Chapter 2, and switch your computer on again.
During the booting process, Windows 95 will detect the PCI
Velocity RS232/422/485, but will display it simply as a "PCI
CARD", and you will briefly see a message box to this effect.
Windows will then display the "Update Device Driver
Wizard", which asks you to "insert any disk which came with
the PCI card". Insert the Serial Solutions CD ROM into an
appropriate drive and click 'Next'.
Chapter 3 Page 29
Software Setup