PCI Velocity RS232422/485
7. Restore Defaults - when clicked, resets the selected COM port
to the following values:
Baud Rate:
Data Bits:
Parity:
Stop Bits:
Flow Control:
Advanced Port Settings.
When the Advanced button of Port Settings is selected the
following dialogue is displayed:
Settings available in this window are:
1. FIFO settings.
Use FIFO Buffers - turns the selected ports FIFO buffer on or
off. It is strongly recommended that the FIFO for both ports is
left enabled.
Receive Buffer - These settings allow the selection of a
receiver FIFO trigger setting. Selecting a low value will allow
Chapter 3 Page 60
Software Setup
9600
8
None
1
Hardware