DPS Telecom NetGuardian V16 G2 User Manual page 62

56
Password
Note: If you want to send authenticated emails, click the appropriate radio button. If you enable POP
authentication, you will have to enter the relevant authentication information the fields below.
SNMP Notification Fields
SNMP Trap Server IP
Trap Port No.
Trap Community
Trap Type
SNMPv3 user
Voice Call Notification Fields (V16 G2 only)
Phone number to call
Delay
Call all numbers in this
list. Ack logic is disabled.
Password for the account being used.
Fig. 11.10 Editing SNMP notification settings
SNMP Notification
The SNMP trap manager's IP address.
The SNMP port (UDP port) set by the SNMP trap manager to
receive traps, usually set to 162.
Community name for SNMP TRAP requests.
Indicate whether you would like to send SNMP v1, v2c or v3
traps.
The SNMPv3 User.
Fig. 11.11 Editing voice call notification settings
Voice Call Notification
Phone number the NetGuardian will call with incoming alarm information.
The amount of time that will pass before the NetGuardian will call the next
person on the assigned call list. Enter s for seconds or m for minutes.
Example: 45s = 45 seconds.
Forces the NetGuardian to call everyone on the assigned call list, disabling
their ability to acknowledge the alarm and stop the phone tree process.