Table of Contents
Advertisement
Chapter 8. Remote/Management Menus
Host 2 Trap IP Address
Defaults to 0.0.0.0. Second destination address for SNMP
traps.
Host 3 Trap IP Address
Defaults to 0.0.0.0. Third destination address for SNMP
traps.
Host 4 Trap IP Address
Defaults to 0.0.0.0. Fourth destination address for SNMP
traps.
System Name
A text string that can uniquely identify an SNMP man-
aged node.
System Contact
A text string containing the name, phone number, and so
forth, of the individual responsible for maintaining an
SNMP managed node.
System Location
A text string describing the physical location of an SNMP
managed node (for example, SECOND FLOOR PBX
ROOM).
Auth. Fail Traps Sent
When enabled, the TDU 120e issues an SNMP trap when
any SNMP request is received with an invalid commu-
nity name. Can be used for security purposes.
Choices: Disabled, Enabled. Defaults to Disabled
Poll Link Status Traps Sent
(DISABLED, ENABLED, defaults to DISABLED)
When enabled, the TDU 120e sends an SNMP trap when-
ever a device configured to be polled fails to respond.
When the device begins responding to polls, a poll link-
up trap is sent. The format of the traps are defined in the
agent MIB.
Choices: Disabled, Enabled. Defaults to Disabled
61202156L2-1A
TDU 120e User Manual
8-5
Advertisement
Table of Contents
