61202156L2-1
Creating a DSO Map
To configure a DS0 Map, perform the following steps:
Step
Initialize the T
1
(current Map A, current Map B, or all IDLE). This step
is optional.
Edit the Temp Map so that it reflects the desired map
2
configuration.
Replace the current DS0 Map A or B configuration
3
with the Temp map configuration.
Initializing the Temp Map
Upon entering the DS0 maps C
Temp map reflects its last configured state.
If you want to...
Initialize the Temp map from its
current configuration to one which
reflects the currently stored Map A
or B configurations, respectively.
Initialize the Temp map to an all
IDLE state.
TDU 120e User Manual
Chapter 5. Configuration Menu
Explanation
Map to one of three configurations
EMP
ONFIGURATION
menu, the
Enter selections...
1 - 2
3
5-19