ALTERNATE METHODS OF CONTROL
T-Watch PRO (ADTRAN PC Program)
Setting up the TDU 120e to Work over a LAN
61202156L2
T-Watch PRO is the ADTRAN PC control program. It
provides complete control over the configuration of the
TDU 120e using a graphical interface. The T-Watch PRO
program displays the same status and performance data
as the terminal screen. This data is displayed in tables and
graphs.
The T-Watch PRO program has the following capabilities:
•
Interfaces with a modem which permits dialing into a
remote TDU 120e location to configure the unit or
read the status or performance of the unit.
•
Receives traps from any TSU product.
•
Records and creates display performance data over a
30-day period.
•
Accesses units via the local area network (LAN).
To set up the TDU 120e to work with T-Watch PRO over
the LAN, follow these steps:
Step
Set the Unit ID using the Front Panel. See Unit ID
1
on page 6-3 for details.
Set control port interface to Normal (10BaseT) or
2
SLIP (chain-in port).
Configure the IP address, default gateway, and
3
subnet mask.
Follow the installation instructions for T-Watch
4
PRO to start the program and connect to the unit.
TDU 120e User Manual
Chapter 3. Operation
Action
3-11