Set Your Country (For Australia / New Zealand Customer Only); Installing The Ink Cartridges - Brother FAX-2480C Setup Manual

Hide thumbs Also See for FAX-2480C:
Table of Contents

Advertisement

Setting Up the Machine
6
Set Your Country
(For Australia / New Zealand
Customer Only)
You must set your country so that the machine works
correctly.
1
Check that the power is turned on by
connecting the power cord.
The LCD shows:
Set Country
Press OK Key
2
Press OK.
The LCD shows:
Australia
Select ab & OK
3
Press a or b to select the country
(Australia or New Zealand).
4
Press OK when the LCD shows your country.
5
The LCD prompts you to make sure of the
country again.
Australia?
1.Yes 2.No
6
Press 1 (Yes) to go to the next step.
---OR---
Press 2 (No) to go back to step 1 to select the
country again.
7
After the LCD shows Accepted for two
seconds, it shows; Please Wait.
6
q
e
q
q
7

Installing the ink cartridges

Warning
If ink gets in your eyes, wash them out with water
at once, and if irritation occurs consult a doctor.
1
Make sure that the power is turned on.
The LCD shows:
No Cartridge
2
Open the ink cartridge cover (1).
3
Pull all the lock release levers down and
remove the yellow protective part (1).
Note
Do not throw away the yellow protective part. You
will need it if you transport the machine.
1
1

Advertisement

Table of Contents
loading

Table of Contents