Faxing Letter Size Documents From The Scanner Glass; Colour Fax Transmission; Cancelling A Fax In Progress; Broadcasting (Monochrome Only) - Brother FAX-2480C User Manual

Faxing Letter size documents
from the scanner glass
When documents are Letter size, you need to
set Scan Size to Letter. If you do not, the side
portion of the faxes will be missing.
a
Make sure you are in Fax mode
b
Press Menu, 2, 2, 0.
c
Press a or b to choose Letter.
Press OK.
d
Press Stop/Exit.

Colour fax transmission

Your machine can send a colour fax to
machines that support this feature.
However, colour faxes cannot be stored in
the memory. When you send a colour fax, the
machine will send it in real time (even if
Real Time TX is set to Off).

Cancelling a fax in progress

If you want to cancel a fax while the machine
is scanning, dialling or sending, press
Stop/Exit.
Broadcasting
(Monochrome only)
5
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups
(see page 45.), One-Touch, Speed-Dial
.
numbers and up to 50 manually dialled
numbers in the same broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
a
Make sure you are in Fax mode
b
Load your document.
c
5
Enter a number. Press OK.
You can use either a One-Touch,
Speed-Dial, a Group or a manually
entered number using the dial pad.
d
Repeat c until you have entered all the
fax numbers you wish to broadcast to.
e
Press Mono Start.
Note
5
• If you did not use up any of the numbers
for Groups, or access codes, or credit card
numbers, you can 'broadcast' faxes to as
many as 140 different numbers.
• The available memory will vary depending
on the types of jobs in the memory and the
number of locations used for
broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use dual access.
(See page 28.)
• Enter the long dialling sequence numbers
as you would normally, but remember that
each Speed-Dial number counts as one
number, so the number of locations you
can store becomes limited.
• If the memory is full, press Stop/Exit to
stop the job. If more than one page has
been scanned, press Mono Start to send
the portion that is in the memory.
Sending a fax
5
. 5
25