Felix printers Pro Series Quick Start Manual page 43

1. Press Upload G-Code, to upload a gcode for printing
to the library
After Uploading the touchscreen will render an Image
for printing.
2. Press the print icon, the print will start.
Webcam monitoring
You can conveniently monitor a print-job via the webcam.
For now this is only enabled on the internal network. If
you want to access this from an external network, a port
needs to be forwarded in your router directed to the IP-
address of the printer.
Navigate to the webcam tab for further information
Time-lapse
You can create a time lapse video of your print for more information on how to do this please consult the
user manual.
Quick Start Guide FELIX BIOprinter
1
2
39
Page