Felix printers Pro Series Quick Start Manual page 27

6.7 Power on
1. Insert the power cable.
2. Flip the power switch of the printer.
3. The lights of the print-head should turn on and immediately after
turning on the printer a FELIX boot screen should be displayed.
4. Bootup time takes about 40 seconds.
Quick Start Guide FELIX BIOprinter
Power Power
Switch Cable
USB – NOT
used for
touchscreen
screen
NOTE:
in some occasions if there is
a firm pull exerted onto the
power cable, the white
housing of the connector
could come out of the
printer. If that happens,
push it back in place to
ensure proper electrical
connection.
Page
23