Felix printers Pro Series Quick Start Manual page 37

Hide thumbs Also See for Pro Series:

Table of Contents

8.5.3

FINE tuning and First layer Z-offset.

In some occasions, it might be needed to do finetuning of the calibration. You can do that in the finetune

First layer Z-offset

The printer is factory tested and finetuned for a 90mm petri dish with a certain thickness. In the case of a

different type of petri dish which is thicker or thinner, the first layer z-offset needs to be adjusted. The

parameter for this is Coating thickness.

After homing (finding the reference point of each axis) the nozzle will have a defined offset to the build

plate. This height can be changed by changing Coating thickness.

Steps.

Select the extruder you want to print with.

2. Set Coating thickness to 0 mm and press Save Changes

3. Go to the main menu -> Select the Move button -> Press Home All

Quick Start Guide FELIX BIOprinter

Page

Table of Contents

Bioprinter