Felix printers Pro Series Calibration Manual page 6

Bed leveling itself
After this the machine will probe the bed and adjust
the bed to level the bed to the head of the machine,
this will insure a smooth first layer.
After this the machine should be ready to go If you see
the first layer being too far away from the bed you can
adjust it, follow these steps.
Touchscreen
Follow these steps to adjust the height of the first
layer.
FELIX Pro Series
By adjusting the coating thickness you can bring the
nozzle closer or farther away from the bed, - brings it
closer and + moves farther.
2
Page