TechniSat TECHNIRADIO 3 Instruction Manual page 110

The Tune> button increases the value, the <Tune button reduces the value.
> Press Select to apply the setting.
> The next time digits (minutes) start to flash and can again be changed as
described above.
> Press the Select button after every additional setting in order to go to the next
setting.
> To set the date, proceed in the same way as described above.
> After all settings have been done and the Select button pressed, [Time saved]
appears on the display.
9.3.2 Automatic time updating
In this submenu, you can determine whether the time update should be done
automatically via DAB+ or FM, or whether you wish to enter it manually (section 9.3.1).
> In the sub-menu [System], use the <Tune or Tune> buttons to select the [Time]
entry, and then press the Select button.
> Using <Tune or Tune>, select the [Autom. Update] item and press Select.
> Select the following options using the <Tune or Tune> and Select buttons:
110