TechniSat TECHNIRADIO 3 Instruction Manual page 103

> Select whether the scan should only stop for stations with a strong signal
[Strong Stations Only] or for all stations (including stations with a weak signal)
[All Stations].
With the All Stations setting, the scan stops automatically upon detecting each
available station. This can result in weak stations being played with background
noise.
8.6 Audio settings
> Hold down the Menu button and use the <Tune or Tune> buttons to select the
[Audio settings] item.
> Press the Select button.
> Using the < Tune or Tune> buttons, select the [Stereo available] or [Mono only]
item in order to play back in stereo (only available via headphones) or only in
mono when the FM reception is weak.
> Confirm by pressing the Select button.
DE
EN
DA
103