TechniSat TECHNIRADIO 3 Instruction Manual page 114

> Using the <Tune or Tune> buttons, select the [Yes] item to run the factory
setting and press the Select button.
All previously stored stations and settings will now be deleted. The device is now
in the same status as when delivered.
> The display will show [Restart ...] and the device will start using the language
selection: [Language]. Using the <Tune or Tune> buttons, select one of the
available languages and confirm the selection by pressing the Select button.
The device then automatically performs a complete scan in DAB mode. While
scanning, the display information shows the progress as well as the number of
digital radio stations detected. After completing the station scan the first DAB+
channel is played.
9.7 SW version
Under SW version you can retrieve the currently installed software version.
> In the sub-menu [System], use the <Tune or Tune> buttons to select the [SW
version] entry, and then press the Select button.
The current software version is displayed.
114