TechniSat TECHNIRADIO 3 Instruction Manual page 102

8.3 Automatic station scan
> Hold down the <Tune or Tune> buttons for longer (2 to 3 sec.) in order to
automatically search for the next station with sufficient signal intensity.
> Alternatively, you can press the Select button.
If an FM station with sufficient signal strength is found, the scan stops and the
station is played. If an RDS station is received, the station name, and possibly the
radio text, appear.
Please use the manual station scan for setting weaker stations.
8.4 Manual station scan
> Press the <Tune or Tune> buttons repeatedly to set the desired stations or frequency.
The display shows the frequency in increments of 0.05 MHz.
8.5 Scan settings
In this menu item it is possible to set the sensitivity of the scan.
> Hold down the Menu button, use the <Tune or Tune> buttons to select the [Scan
settings] item and press the Select button.
102