TechniSat TECHNIRADIO 3 Instruction Manual page 106

> Press the Select button.
> Use <Tune or Tune> to select a period after which the TECHNIRADIO 3 should
switch off. You can choose between Off, 10, 15, 30, 45 and 60 minutes.
> Press Select to apply the setting.
The remaining time is shown on the display in the top right.
9.2 Alarm
The alarm switches on the TECHNIRADIO 3 at the set time. 2 alarm times can be
programmed. The description of how to programme Alarm 1 serves as an example.
The TECHNIRADIO 3 must be supplied with power by the mains adapter to allow
the alarm to function. The alarm function does not operate in battery mode.
9.2.1 Setting Alarm 1
> In the sub-menu [System], use the <Tune or Tune> buttons to select the
[Alarm] entry.
> Press the Select button.
> Use <Tune or Tune> to select the alarm that you wish to set. In this example this
is [Alarm 1], and then the Select button again.
106