TechniSat TECHNIRADIO 3 Instruction Manual page 96

> In order to perform a complete scan, open the Menu by holding down the Menu
button and use the <Tune, Tune> and Select buttons to select the menu item
[Complete Scan].
> [Scanning...] appears on the display.
During the scan, a progress bar and the number of stations found are displayed.
If no station is detected, check the telescopic antenna and, if required, change
the installation location (Section 5.3.3 / 3.2.1).
7.2.2 Selecting the station
> By pressing the <Tune or Tune> buttons, the station list can be called up and
you can switch between the available stations.
96