TechniSat TECHNIRADIO 3 Instruction Manual page 109

> In the sub-menu [System], use the <Tune or Tune> buttons to select the
[Alarm] entry, and then press the Select button.
> Use <Tune or Tune> to select the alarm that you wish to switch on / off and
then press the Select button again.
[Setting Alarm 1] appears on the display.
> Use the <Tune, Tune> buttons to select [Alarm on] or [Alarm off] and press the
Select button to apply the setting.
9.3 Date and time settings
9.3.1 Manually setting the date / time
Depending on the setting for time updates (Section 9.3.2), the date and time may have
to be set manually.
> In the sub-menu [System], use the <Tune or Tune> buttons to select the [Time]
entry, and then press the Select button.
> Using <Tune or Tune>, select the [Set time / date] item and press Select.
> The first time digits (hours) flash and can be changed using the <Tune or Tune>
buttons.
DE
EN
DA
109