TechniSat TECHNIRADIO 3 Instruction Manual page 95

7.1.2 Audio stream
With digital radio, audio streams are continuous data streams which contain the
MPEG 1 audio layer 2 frames and thereby represent acoustic information. This enables
standard radio channels to be broadcast and listened to on the receiver side. Digital
radio provides you with not only with excellent sound quality radio but also additional
information. This may refer to the programme being broadcast or be independent
information (e.g. news, weather, traffic, tips).
7.2 DAB+ (digital radio) reception
> Press the /Mode button until [DAB] is shown on the display.
If DAB+ is being started for the first time, a complete station scan is performed.
Make sure that the telescopic antenna is fully extended when doing this. After
the scan is complete, the first station is played back in alphanumeric order.
7.2.1 Performing a full scan
The automatic scan Full scan scans all DAB+ Band III stations and thereby finds
all stations being broadcast within the reception range.
After the scan is complete, the first station is played back in alphanumeric order.
DE
EN
DA
95