TechniSat TECHNIRADIO 3 Instruction Manual page 89

5.4 General device functionality
5.4.1 Switching on the device
> In order to guarantee good DAB+ / FM reception, please fully extend the antenna
located on the back of the device. To do so, please refer to Section5.3.3.
> First prepare the TECHNIRADIO 3 for operation as described in Sections 5.3.1
and 5.3.2.
> Press the /Mode button to switch on the TECHNIRADIO 3.
After switching on the device for the first time, you must first set the [Language].
Using the <Tune or Tune> buttons, select one of the available languages
and confirm the selection by pressing the Select button. The device then
automatically performs a complete scan in DAB mode. While scanning, the
display information shows the progress as well as the number of digital radio
stations detected. After completing the station scan the first DAB+ channel is
played.
DE
EN
DA
89