Table of Contents
Advertisement
60
C H A P T E R S E V E N
Advanced Receiving Operations
See
"Outgoing
Message
(OGM) of
External
TAD"
chap. 2
If the MEMORY RECEPTION function is OFF at this time...
The current fax reception will continue, with the remaining page(s) being
stored in memory, subject to available memory. Subsequent incoming fax
calls will not be automatically answered until fresh paper is put in the
paper cassette. The last fax received will be printed as soon as fresh
paper is put in the cassette.
1
Press Menu, 1, 2, 6. The screen displays
6.MEM.RECEIVE
2
Use
or
to select ON or OFF.
3
Press Set when the screen displays your selection.
4
Press Stop to exit.
Operation from an External or Extension
Telephone
If you answer a fax call on an external or extension phone, you can make
your MFC take over by using the Activation Code. When you press the
Activation Code
5 1, the MFC starts to receive a fax.
If you answer a call at an extension or an external phone, and no one is
on the line, assume you're receiving a fax. At an extension phone, press
5 1, wait for fax receiving tones (chirps), then hang up. At an external
5 1 and wait for the phone to be disconnected (the screen
phone, press
displays RECEIVING) before you hang up. (Your caller will have to
press Start to send the fax.)
If you accidentally pick up an extension phone when a fax message is
being received, you may disrupt the transmission or render some portions
unreadable.
The Remote Activation Code also can be used by your callers. When you
are using a external TAD, your outgoing message (OGM) should end
with the statement "to send a fax, press
5 1".
Advertisement
Table of Contents
