Table of Contents
Advertisement
30
C H A P T E R T H R E E
Brother coated (ink jet) paper is coated only on one side. When
loading paper in the paper cassette, make sure that the whiter side
(the coated side) is facing down.
The coated side of glossy paper is shiny. Do not touch the shiny side.
Load glossy paper in the paper cassette with the shiny side facing
down.
DO NOT touch the coated side of the paper or either side of
transparencies, because the media absorbs water and perspiration
easily, and this might cause decreased output quality.
For optimum output quality, be sure to use paper appropriate for your
resolution setting.
Store paper in the original bag, and keep it sealed. Keep the paper
flat and away from moisture and direct sunlight and heat.
Transparencies designed for laser printers/copiers may stain your
next document. Use only recommended transparencies for ink jet
printer.
Paper Specifications for Cassette and Manual
Slot
When used as a printer, the MFC can handle paper that has the following
specifications:
But please note that you can receive fax messages only on A4 cut sheet
Paper Type
Paper Size
Cut Sheet
A4, Letter, Executive 250 Sheets of 75 g/m
Legal
Coated Paper A4, Letter
Transparencies A4, Letter
Glossy Paper
A4, Letter
Envelopes
DL, COM-10, C5,
B5, Monarch
Organizer
K, L
Paper Capacity for Paper Cassette
Cut Sheet Paper Weight 64 to 120 g/m
Paper Cassette: Up to 27 mm/Approximately 250 Sheets of 75 g/m
Output Stacker: Approximately 75 Sheets of 75 g/m
Transparencies and glossy paper must be picked up from the paper
tray page by page.
When you use glossy paper in the paper cassette, place a sheet of plain
paper in the cassette first, then stack the glossy paper on top of it.
Cassette Capacity
2
100 Sheets of 75 g/m
2
100 Sheets
50
20
10
10
2
2
2
Advertisement
Table of Contents
