Table of Contents
Advertisement
Q U I C K - D I A L N U M B E R S A N D D I A L L I N G O P T I O N S
Dialling Options
When you dial an auto dial number, the screen displays the name you've
stored, or, if you haven't stored a name, the fax number you've stored.
Searching the Telephone Index
You can search for names you have stored in One Touch and Speed Dial
memories. Names are stored alphabetically.
1
2
3
4
One Touch Dialling
1
2
3
If you try to use a One Touch or Speed Dial location with no number
stored in it, you hear a warning sound, and screen displays NOT
ASSIGNED. The display returns to normal after 2 seconds.
Speed Dialling
1
2
3
Pause
Press Redial/Pause to insert a pause between digits to be dialled.
If your MFC is connected to a PABX, you may need to insert an
additional number prefix (e.g. "9") and a "pause" before each fax or
telephone number to gain access to the outside line. When you press
Redial/Pause, a dash "-" will appear on the display. By storing a pause,
you can create a delay of 3.5 seconds.
Insert the document(s) in the feeder, or on the scanner glass.
Press Tel-Index, then enter the first letter of the name you're looking
for.
Press
or
to search the memory.
When the screen displays the name you want to call, press Start to
begin dialling.
Insert the document(s) in the feeder, or on the scanner glass.
Press the One Touch key of the location you want to call.
Press Start.
Insert the document(s) in the feeder, or on the scanner glass.
Press Speed Dial, then press the two-digit Speed Dial number.
Press Start.
71
Advertisement
Table of Contents
