Table of Contents
Advertisement
26
C H A P T E R T W O
Installing the Maintenance Utility on
MS-DOS
®
The Scanner driver and fax application work only in the Windows
environment, they cannot be used in DOS. You can use the MFC as a
printer by using an ESC/P printer driver.
To print from your application with the MFC-760, select an Epson ESC/
P compatible printer such as Epson LQ-510, LQ-810 or LQ-2550 in your
application's printer selection menu. Epson LQ-510 and 810 supports
only monochrome printing. The settings for printing can be done in the
MAINTENANCE UTILITY for DOS.
Installing the MFC-760 Maintenance Utility for
DOS
Before you install the program, make sure you have the following
hardware and software to install the program:
DOS
Version 3.3 or later
Monitor
EGA/VGA or compatible
Option
Mouse; the mouse driver must be installed.
(You can also operate the program with the keyboard.)
Follow these steps to install the remote printer console program:
1
Make sure your machine is connected to your computer and it is set
to Online.
2
Start your computer and go to the DOS prompt. If you are in
®
Windows
, exit and return to the DOS prompt.
3
Insert the Brother CD-ROM into your CD-ROM drive (substitute
your appropriate drive letter for "X").
4
At the DOS prompt (C:\>) type X: (X is the letter of your CD-ROM
drive) and press Enter.
c:\X:
Advertisement
Table of Contents
