Table of Contents
Advertisement
90
C H A P T E R E L E V E N
Select Paper Type
1
Press Menu, 3, 1. The screen displays
1.PAPER TYPE
2
Press Set.
3
Press
or
to select your paper setting.
PAPER:PLAIN
PAPER:INK JET
PAPER:GLOSSY
PAPER:TRNSPRNCY
4
Press Set when the screen displays your selection.
If you use Brother coated paper for 360 dpi (BP36CA) or 720 dpi
(BP72CA), select INK JET, then select 360DPI or 720DPI. If you use
non-Brother ink jet paper, select INK JET, then select OTHER. If you
did not select INK JET, skip to Step 7. (For information on ordering
Brother paper, see the page before the Table of Contents.)
5
Press
or
to select 360DPI, 720DPI, or OTHER.
6
Press Set.
7
Press Stop to exit.
The MFC ejects paper onto the top of the paper cassette cover with the
printed side face up. When you use transparencies, remove each sheet
immediately, to prevent a paper jam or curled sheets.
Advertisement
Table of Contents
