Felix printers Pro Series Troubleshooting Manual page 15

Felix Pro L/XL Troubleshooting guide
14
December 10, 2019,
Now turn the machine back on and go to the move menu.
Press the home all button, this will move the bed down a bit but because the reference blocks are still under it, it
will press it down making a clicking noise this is normal and intended. Now the bed is calibrated again, check the
bottom belt again and retighten if necessary. After this the printer should be good to go again if it still gives the
error contact us. If it works again reinstall the coverings and start printing again.
www.FELIXprinters.com
FELIX Pro series