Table of Contents
Advertisement
CONFIGURATION SOFTWARE
LIMITED LIABILITY
E+E Elektronik shall not be held liable for any damages or consequential damages (for example, but not
restricted to, loss of earnings, interruption of business, loss of information and data or any other financial
losses) resulting from the installation, use or impossibility of use of an E+E Elektronik software product and
any associated support services or non-performance of support services.
1.
General
The configuration software, in the scope of supply, allows for a user-friendly adaptation of the flowmeter to the
application. In addition, the measurement values for flow and temperature can be calibrated / adjusted.
The system requirements for the installation and execution of the software are:
•
Windows XP with SP3, Windows Vista or Windows 7
•
.NET framework 3.5 with SP1
•
USB 2.0 interface
During setup there will be no installation of .NET Framework 3.5 SP1 – if the required version is not already
installed on the computer the following error message will appear at the start of the configuration software.
.NET Framework 3.5 SP1 can be installed using Windows Update.
2.
Installation
In order to set up a smooth installation of the configuration software of the EE772, admin authorization for the
personal computer is required.
•
Place the CD-ROM in the drive tray of the computer.
•
At this moment the EE772 should NOT be connected with the USB cable to the computer.
•
The setup program will start automatically with the Auto Run-function – in case the program does
not start automatically, one can start the setup software manually by starting Setup.exe directly.
•
The InstallShield-Wizard for the EE772 configurator will be started.
•
Follow the instructions on the screen to install the software.
At first, the configuration software will be installed and then the installation of the USB driver activated – except
if the user has defined that USB setup is disabled.
The USB driver will be automatically installed the moment the first connection is made with the EE772.
The appearing dialog boxes can be dealt with the settings "No. do not download driver from the internet" and
"Install the hardware automatically".
If the EE772 configuration software and the USB driver are installed correctly, and the EE772 is connected
via the USB interface with the personal computer, a connection "Silicon Labs
CP210x USB to UART Bridge" should have been created in the device man-
ager.
See: Start => Settings => Control Panel => System => Hardware => Device
Manager
22
Advertisement
Table of Contents
