4. Connecting V-T500/V-N500 to PC
4.1 Installing USB Driver
Install the USB driver to connect the PC and the V-T500/V-N500.
Only the configuration file of the USB driver is included in the V-T500/V-N500 development kit.
The USB driver is included in the Android SDK, which was installed in Chapter 3.3 Installing Android SDK.
First, create a folder for the driver (e.g. "C:\V-T500Driver").
Next, search a file named android_winsub.inf in the installed folder of Android SDK.
Figure 4.1
When the file android_winsub.inf is found, copy it along with the sub folders in the folder for the driver that
you created at the beginning.
Then, copy the following file from the CD.
V-T500/V-N500 development kit.\V-T500\driver\ android_winsub.inf
Paste the file in the same folder for the driver as above by overwriting.
When the mini-B USB port of V-T500/V-N500 and the USB port of the PC are connected by cable, the
connection is automatically detected by the OS, and the following dialog is displayed. Follow the instructions on
the screen.
Select No. not this time, and press Next. > button.
25