Intended Use; Technical Specification; How The Besam Sl500, Besam Sl500 T And Besam Sl500 Sl Work - Assa Abloy Besam SL500 User Manual

As your entrances are part of your business flow, there's every reason to keep
them working well. ASSA ABLOY Entrance Systems offers you a maintenance and
modernization expertise to rely on. Our Maintenance Programs and Modernization
Services for entrance automation is backed by a extensive expertise for all types
of pedestrian- and industrial door and docking systems, independent of brand.
At your disposal is a team of dedicated expert technicians, proven through decades
of maintenance, service and satisfied customers.

Intended use

The Besam SL500, Besam SL500 T and Besam SL500 SL are automatic sliding door operators developed
to facilitate entrances to buildings and within buildings through sliding doors.
The door is designed to offer continuous use, a high degree of safety and maximum lifetime. The
system is self-adjusting to the effects caused by normal variations in the weather conditions and to
minor friction changes caused by e.g. dust and dirt.
In emergency situations the doorset is opened and remains open automatically. It may also be
equipped with break-out function, in which case the door leaf is pushed manually open in the escape
direction.
Dual batteries and motors are used in escape routes as indicated in associated certificates. See
"Electrical emergency unit with batteries" on page 20 and "Electrical emergency unit with batteries
and two motors" on page 20. For manual break-out see "Break-out unit PSB" on page 20.
It is to be used indoors where it is suitable for almost all types of external and internal sliding doors.
Ensure that the lock is only activated when there are no persons in the room.
For installation and maintenance see Installation and Service manual 1009203.
Save these instructions for future reference.

Technical specification

Manufacturer:
Address:
Type:
Mains power supply:
Power consumption:
Degree of protection:
Approvals:

How the Besam SL500, Besam SL500 T and Besam SL500 SL work

The Besam SL500, Besam SL500 T and Besam SL500 SL work electromechanically.
The motor, control unit, transmission – and optional emergency unit and electromechanical locking
device – are all assembled in a support beam with an integrated cover. The motor and gear box
transmit movement to the door leaves by means of a tooth belt. The door leaf is fitted to a door ad-
apter/carriage wheel fitting and hangs on a sliding track. The guiding at the bottom is carried out by
means of floor guides, (Full Break-Out) or Side Panel Guides (Fixed Sidelites).
When an OPENING IMPULSE is received by the control unit the motor starts and transmits movement
to the door leaves, which move to the open position.
The closing starts when no OPENING IMPULSE is received and the HOLD OPEN TIME has expired.
The Besam SL500, Besam SL500 T and Besam SL500 SL user can select five different modes of oper-
ation if a programme selector is installed. See Operation mode selectors on page 9.
1009216-EI-4.0
ASSA ABLOY Entrance Systems AB
Lodjursgatan 10, SE-261 44 Landskrona, Sweden
Sliding Door Operator Besam SL500, Besam SL500 T and Besam SL500 SL
100 V AC -10% to 240 V AC +10%, 50/60 Hz, fuse 10 AT
Max. 250 W
IP20
Third party approvals from established certification organizations valid
for safety in use, see Declaration of Conformity.
Issue 2015-10-23 7