Sending A Fax Manually; Sending A Fax At The End Of A Conversation; Out Of Memory Message - Brother MFC MFC-5460CN User Manual

Chapter 5

Sending a fax manually

Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
a
Make sure you are in Fax mode
b
Load your document.
c
Pick up the handset of an external
phone or press Hook and listen for a dial
tone.
d
Dial the fax number you want to call.
e
When you hear the fax tone, press
Black Start or Color Start.
If you are using the scanner glass
press 1 to send a fax.
f
If you picked up the handset of an
external phone replace it.
Sending a fax at the end of a
conversation
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Make sure you are in Fax mode
c
Load your document.
d
Press Black Start or Color Start.
If you are using the scanner glass
press 1 to send a fax.
1.Send 2.Receive
e
Replace the handset of an external
phone.
36

Out of Memory message

5
If you get an Out of Memory message
while scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an Out of Memory message
.
while scanning a subsequent page, you will
have the option to press Black Start to send
the pages scanned so far, or to press
Stop/Exit to cancel the operation
Note
If you get an Out of Memory message
while faxing and you do not want to delete
your stored faxes to clear the memory,
you can send the fax in real time. (See
Real time transmission on page 34.)
5
.
5