Routine Maintenance; Replacing The Ink Cartridges - Brother MFC MFC-5460CN User Manual

Routine maintenance

Replacing the ink cartridges

Your machine is equipped with an ink dot
counter. The ink dot counter automatically
monitors the level of ink in each of the 4
cartridges. When the machine detects an ink
cartridge is running out of ink, the machine
will tell you with a message on the LCD.
The LCD will tell you which ink cartridge is low
or needs replacing. Be sure to follow the LCD
prompts to replace the ink cartridges in the
correct order.
Even though the machine tells you that an ink
cartridge is empty, there will be a small
amount of ink left in the ink cartridge. It is
necessary to keep some ink in the ink
cartridge to prevent air from drying out and
damaging the print head assembly.
a
Open the ink cartridge cover.
If one or more ink cartridges are empty,
for example Black, the LCD shows
Ink Empty Black and
Replace Ink.
b
Pull the lock release lever down and
take out the ink cartridge for the color
shown on the LCD.
Troubleshooting and Routine Maintenance
B
B
c
Open the new ink cartridge bag for the
color shown on the LCD, and then take
out the ink cartridge.
d
Remove the protective yellow cap (1).
1
Improper Setup
DO NOT touch the area shown in the
illustration below.
113