Getting Started; Initial Setup; Setting The Date And Time; Setting Tone And Pulse Dialing Mode - Brother MFC MFC-3340CN Manual

2

Getting started

Initial Setup

Setting the Date and Time

When the machine is not in use it will display the date and time. If you
set up the Station ID the date and time displayed by your machine
will be printed on every fax you send. If there is a power failure, you
may have to reset the date and time. No other settings will be
affected.
1
Menu/Set
Press
2
Enter the last two digits of the year.
Menu/Set
Press
3
Enter two digits for the month.
Menu/Set
Press
(For example, enter 09 for September, or 10 for October.)
4
Enter two digits for the day.
Menu/Set
Press
5
Enter the time in 24-Hour format.
Menu/Set
Press
6
Stop/Exit
Press
The LCD now shows the date and time whenever the machine
is in Fax mode.

Setting Tone and Pulse dialing mode

1
Menu/Set
Press
2
Press or
▲
Tone ).
Menu/Set
Press
3
Stop/Exit
Press
2 - 1 GETTING STARTED
0 2
, , .
.
.
. (For example, enter 06 for 6th.)
. (For example, enter 15:25 for 3:25 P.M.)
.
0 4
, , .
to select Pulse (or
▼
.
.
2.Date/Time
4.Tone/Pulse