Remote Commands - Brother MFC MFC-3340CN Manual

Remote commands

Follow the commands below to access features when you are away
from the machine. When you call the machine and enter your
Remote Access Code (3 digits followed by
two short beeps and you must enter a remote command.
Remote commands
91 Playing Voice Messages
(FAX-1940CN only)
1 Repeat
or
Skip Backward
2 Skip Forward
9 STOP Playing
93 Erase all ICM
(FAX-1940CN only)
94 Play and Record OGM in
Memory
(FAX-1940CN only)
1 Play 1 Msg Ctr OGM
2 F/T OGM
2 Record 1 Msg Ctr OGM
2 F/T OGM
6 - 7 REMOTE FAX OPTIONS
Operation details
After one long beep, the machine plays the
ICM.
Press 1 while listening to an ICM to repeat it.
If you press 1 before a message, you will hear
the previous message.
While playing the ICM, you can skip to the
next message.
Stop playing the ICM.
If you hear one long beep, the erase is
accepted. If you hear three short beeps, you
cannot erase because all voice messages
have not been played, or there are no voice
message to erase.
* This code erases all recorded messages,
not one at a time.
The machine plays the selected OGM. You
can stop playing OGMs by pressing 9.
After one long beep, you can record the
selected OGM. You will hear the message
played once. You can stop recording the
message by pressing 9.
), the system will give