Brother MFC MFC-3340CN Manual page 154

DIFFICULTY
Printing (Continued)
Smudged stain at the top
center of the printed page.
Printing appears dirty or ink
seems to run.
Stains appear on the reverse
side or at the bottom of the
page.
There are some dense lines.
The printouts are wrinkled.
Cannot perform '2 in 1 or 4 in 1'
printing.
Print speed is too slow.
®
True2Life is not working
properly.
Machine feeds multiple pages
Printed pages are not stacked
neatly.
Machine does not print from
Paint Brush.
Machine does not print from
Adobe Illustrator.
Printing Received Faxes
Condensed print and white
streaks across the page or the
top and bottom of sentences
are cut off.
Vertical black lines when
receiving.
TROUBLESHOOTING AND ROUTINE MAINTENANCE 12 - 10
SUGGESTIONS
Make sure the paper is not too thick or not curled. (See About paper on
page 1-10.)
Make sure you are using the proper types of paper. (See About paper
on page 1-10.) Don't handle the paper until the ink is dry.
Make sure the Printer Platen is not dirty with ink. (See Cleaning the
machine Printer Platen on page 12-24.)
Make sure you are using the paper support flap. (See How to load
paper, envelopes and post cards on page 1-15.)
Check 'Reverse Order' in the Basic tab of the printer driver.
In the printer driver 'Basic' tab, click the 'Settings', and uncheck the
'Bi-Directional Printing'.
Check that the paper size setting in the application and in the printer
driver are the same.
Changing the printer driver setting may improve the print speed.
Highest resolution needs longer data processing, transfer and printing
time. Try the other settings of quality in the printer driver 'Basic' tab.
Also, click the 'Settings' tab, and make sure you uncheck the
®
True2Life .
Borderless printing is slower than normal printing. If you want to print
more quickly, set the Borderless feature off. (See Media Type on page
1-8 in Software User's Guide on the CD-ROM.)
If the image data is not full color in your application (Such as 256 color),
®
True2Life will not work. Please use at least 24 bit color data with the
®
True2Life feature.
Make sure the paper is loaded properly in the paper tray. (See How to
load paper, envelopes and post cards on page 1-15.)
Check that more than two types of paper are not loaded in the paper tray
at any one time.
Make sure you are using the paper support flap. (See How to load
paper, envelopes and post cards on page 1-15.)
Try setting the Display setting to '256 colors.'
Try to reduce the print resolution.
This can be caused by static or interference on the telephone line. You
can make a copy using the Black Start key to see if the same problem
occurs. If the copy looks good then the problem is probably the phone
line and not your machine.
The sender's scanner may be dirty. Ask the sender to make a copy to
see if the problem is with the sending machine. Try receiving from
another fax machine.