Setting Your Remote Access Code - Brother MFC MFC-3340CN Manual

Setting your Remote Access Code

The remote access code lets you access the Remote Retrieval
features when you are away from your machine. Before you use the
remote access and retrieval features, you have to set up your own
code. The default code is inactive code (---
1
Menu/Set
Press
2
Enter a three-digit code using
0
numbers
Menu/Set
Press
Do not use the same code which is set in your Fax Receive
51
Code (
(See Operation from extension telephones on page A-7.)
3
Stop/Exit
Press
You can change your code at any time by entering a new one.
If you want to make your code inactive, press
2 to restore the inactive setting (---
6 - 5 REMOTE FAX OPTIONS
2 5 2
, , , .
9
- , .
. (The preset '
) or Telephone Answer Code (
.
).
2.Remote Access
' cannot be changed.)
# 51
).
Stop/Exit
).
in Step