Clock and mode can be configured by AT command, and the default configuration is master mode using
short frame synchronization format with 2048kHz PCM_CLK and 8kHz PCM_SYNC.
The following figure shows a reference design of PCM interface with an external codec IC.
Figure 9: Reference Circuit of PCM Application with Audio Codec
NOTE
It is recommended to reserve an RC (R=22Ω, C=22pF) circuit on the PCM signal lines, especially for
PCM_CLK.
3.10. Control and Indication Signals
The following table shows the pin definition of control and indication signals.
Table 11: Pin Definition of Control and Indication Signals
Pin Name
Pin No.
RI
17
DTR
31
W_DISABLE#
20
PERST#
22
LED_WWAN#
42
EC200T_Series_Mini_PCIe_Hardware_Design
I/O
Power Domain
DO
3.3 V
DI
3.3 V
DI
3.3 V
DI
3.3 V
OC
LTE Standard Module Series
EC200T Series Mini PCIe Hardware Design
Description
Ring indication
Data terminal ready
Airplane mode control;
Pulled up by default;
Active low.
Module reset ;
Active low.
LED signal for indicating the network
30 / 54