Quectel EC200T Series Hardware Design page 17

Power Supply
Transmitting Power
LTE Features
UMTS Features
GSM Features
Internet Protocol Features
SMS
(U)SIM Interface
UART Interface
EC200T_Series_Mini_PCIe_Hardware_Design
Supply voltage: 3.0–3.6 V
Typical supply voltage: 3.3 V
Class 4 (33dBm±2dB) for EGSM900
Class 1 (30dBm±2dB) for DCS1800
Class E2 (27dBm±3dB) for EGSM900 8-PSK
Class E2 (26dBm±3dB) for DCS1800 8-PSK
Class 3 (24dBm+1/-3dB) for WCDMA bands
Class 3 (23dBm±2dB) for LTE-FDD bands
Class 3 (23dBm±2dB) for LTE-TDD bands
Support up to 3GPP R8 non-CA Cat 4 FDD and TDD
Support 1.4/3/5/10/15/20MHz RF bandwidth
Support MIMO in DL direction
FDD: Max 150Mbps (DL), Max 50Mbps (UL)
TDD: Max 130Mbps (DL), Max 30Mbps (UL)
Support 3GPP R7 HSPA+, HSDPA, HSUPA and WCDMA
Support QPSK and 16-QAM modulation
HSDPA+: Max 21Mbps (DL)
HSUPA: Max 5.76Mbps (UL)
WCDMA: Max 384kbps (UL), Max 384kbps (DL)
GPRS:
Support GPRS multi-slot class 12
Coding scheme: CS-1, CS-2, CS-3 and CS-4
Max 85.6kbps (DL), Max 85.6kbps (UL)
EDGE:
Support EDGE multi-slot class 12
Support GMSK and 8-PSK for different MCS (Modulation and Coding
Scheme)
Downlink coding schemes: MCS 1-9
Uplink coding schemes: MCS 1-9
Max 236.8kbps (DL), Max 236.8kbps (UL)
Support protocols TCP/UDP/PPP/NTP/NITZ/FTP/HTTP/PING/CMUX/
HTTPS/FTPS/SSL/FILE/MQTT/MMS*/SMTP*/SMTPS*
Support PAP and CHAP for PPP connections
Text and PDU modes
Point-to-point MO and MT
SMS cell broadcast
SMS storage: (U)SIM card currently
Support USIM/SIM card: 1.8 V, 3.0 V
Main UART:
Support RTS and CTS hardware flow control
Baud rate can reach up to 230400bps, 115200bps by default
Used for AT command communication and data transmission
LTE Standard Module Series
EC200T Series Mini PCIe Hardware Design
15 / 54